TRX—Torque Transducer
Model: TQ-TRX
The TQ-TRX provides a flange design device for measuring torsion.
The TRX is produced from stainless steel construction and has a fully welded construction.
The load cell has been designed for test rig applications where static and dynamic measurement is required.
Typical Specification
| Parameter | Value | Units |
|---|---|---|
| Static Torque | 0.. 100, 250, 500, 1000, 2000 | Nm |
| Rated Output | 1 ±0.1% | mV/V |
| Linearity & Hysteresis | 0.06 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.03 | ±% of Applied Load |
| Zero Balance | ±0.5 | % |
|
Temp. Range: Operating Temp. Range: Compensated |
-10 to +70°C -10 to +60°C |
°C |
|
Temp. Effect: On Output Temp. Effect: On zero |
0.01 0.02 |
± of FS ± of FS |
| Safe Overload | 120 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 15 |
Volts DC |
| Input Resistance | 700 nom | Ohms |
| Outut Resistance | 700 nom | Ohms |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP67 | |
| Cable | 5m 4 core screened |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Ratings 100—2000Nm
- Sealed to IP67
- Accuracy 0.06% FS
Applications
- Test Machines
- Process Control
