TRS—Torque Transducer
Model: TQ-TRS
The TQ-TRS provides a small device for measuring torsion.
The TRS is produced from stainless steel construction.
The load cell has been designed for test rig applications where static and dynamic measurement is required.
Typical Specification
| Parameter | Value | Units |
|---|---|---|
| Static Torque | 0.. 0.5, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000 | Nm |
| Rated Output | 0.5-25Nm = 1mV/V ±0.5% 50-1000Nm = 2mV/V ±0.5% |
mV/V |
| Linearity & Hysteresis | ±0.2% | ±% of Rated Output |
| Zero Return after 30 minutes | 0.03 | ±% of Applied Load |
| Zero Balance | ±0.5 | % |
|
Temp. Range: Operating Temp. Range: Compensated |
-10 to +70°C -10 to +40°C |
°C |
|
Temp. Effect: On Output Temp. Effect: On zero |
0.02 0.02 |
± of FS ± of FS |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 15 |
Volts DC |
| Input Resistance | 440 nom | Ohms |
| Outut Resistance | 350 nom | Ohms |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | ||
| Cable | 5m 4 core screened |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Ratings 0.5—1000Nm
- Sealed to IP40
- Accuracy 0.2% FS
Applications
- Test Machines
- Process Control
