RT2—Rotating Torque Transducer
Model: TQ-RT2
The TQ-RT2 provides a key slot design device for measuring rotational torsion up to 4000 rpm.
The RT2 is produced from stainless steel with an aluminium housing.
Options: Square drive, amplified output of ±10V.
The load cell has been designed for test rig applications.
Typical Specification
| Parameter | RT2 | RT2A |
|---|---|---|
| Static Torque | 25, 50, 100, 250, 500 Nm | 5, 10, 25, 50, 100, 250, 500 Nm |
| Rated Output | 25Nm 1mV/V ±0.2% 50-500Nm 2mV/V ±0.2% |
±10V ±0.2% |
| Linearity & Hysteresis | 0.2% | 0.2% |
| Zero Return after 30 minutes | 0.03 | ±% of Applied Load |
| Zero Balance | ±0.5 | % |
|
Temp. Range: Operating Temp. Range: Compensated |
-10 to +70°C -10 to +70°C |
-10 to +70°C -10 to +70°C |
|
Temp. Effect: On Output Temp. Effect: On zero |
±0.2% of FS ±0.2% of FS |
±0.2% of FS ±0.2% of FS |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 VDC 15 VDC |
15 - 24 VDC 28 VDC (Max 30mA) |
| Input Resistance | 440 Ohms nom | NA |
| Outut Resistance | 350 Ohms nom | NA |
| Insulation Resistance | >2GΩ at 50VDC | >2GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP40 | |
| Cable | connector |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Ratings 5—500Nm
- Sealed to IP40
- Rotational Speed 4000 rpm
- Accuracy 0.2% FS
Applications
- Test Machines
- Process Control
