TP1- Pressure Transducer
Model: P-TP1
The P-TP1 pressure transducer can be supplied in two versions:
TP1—strain gauge 2mV/V output
TP1-A—amplified 0-5V output which makes the connection to a plc or to more advanced acquisition systems easier.
The sensing element is produced from 17-4pH stainless steel.
Every transducer is entirely laser welded and completely resin encapsulated.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Nominal Displacement | 10 - 20 (Relative) 50-100-250-350-500-700 (Absolute) |
bar |
| Rated Output | 2.0 nominal | mV/V |
| Linearity & Hysteresis | 0.5 (Relative) 0.25 (Absolute) | ±% of FS |
| Zero Return after 30 minutes | NA | ±% of Applied Load |
| Zero Balance | 0.5 | ±% of Full Scale |
| Temp. Range: Operating Temp. Range: Compensated |
-10 to +110 -10 to +110 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.015 0.02 |
±of FS ±of FS |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 18 |
Volts AC or DC |
| Input Resistance | 440 nom | ohm |
| Outut Resistance | 350 nom | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP67 | |
| Cable | 3m 4 core screened |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Features
- Relative Pressure 10-20 Bar
- Absolute Pressure 50-700 Bar
- Sealed to IP67
- Strain Gauge output
- Linearity ±0.25% to ±0.5%
Applications
- Test Machines
- Process Control
- Harsh environments
