Digital Load Cell Calibration Simulator
Type SG- PA8201
The SG-PA8201 is a hand held digital load cell simulator which can be used to simulate load cell outputs in the range of -3.1mV/V to +3.1mV/V.
The signal output is increased and decreased via the front panel push buttons.
For example, when connected to a load cell display which provides 10VDC excitation the SG-PA8201 will allow the output to be varied from -31.000 to +31.000 mV.
A numerical and bargraph indication of the output is provided on the display.
The display is also provided with selectable on/off backlight and the auto display off timer which helps conserve battery power.
The unit is supplied with a rechargeable 9V battery and plug in charger.
Click here to view full data sheet
Features
- Useful for scaling and system testing
- -3.1000 to +3.1000 mV/V output
- Numerical and bargraph display of output level
- Load Cell resistance DIP switch selectable as 350, 700, 1000 or 2000Ω
- Auto power off
- Rechargeable 9V battery and charger
- Uses DC excitation from the display or monitor
- 4 or 6 wire load cell simulation
- Output adjustment down to 0.001mV/V increments
- Push button setup and adjustment
- Rugged stainless steel case