Load Cell and Strain Gauging Specialists

PCM

Products & Services

Compression Only Load Cells

Compression occurs when a compressive stress is applied to a material resulting in their compaction. This leads to a shortening in length, nominally <0.5mm.

Compression Only Load Cell

To be aware of:

  1. How the force is going to be applied to the load cell. This is how you maximise your accuracy in the system.
  2. Mis-aligned forces can damage certain designs of load cells.
  3. Be aware of how the force and re-acting force is applied to the load cell. Refer to the sketch: Pg 2 bottom right hand side of the PCM data sheets.

If you would prefer to discuss your application with an engineer whilst studying the website, please do not hesitate to contact us on +44 (0) 1926 864444.

Compression Load Cells

Copyright © 2009 PCM Ltd. All rights reserved. Created by www.oyster-design.com