TC4—Bi-Directional Pancake Load Cell
Model: BD-TC4
The BD-TC4 provides a simple low profile device for tension and compression measurement.
The TC4 is produced from stainless steel and is a fully welded assembly.
The TC4 load cell has been designed for test rig applications where static and dynamic measurement is required.
Typical Specification
| Parameter | Value | Units |
|---|---|---|
| Capacities Range | 0.5 - 50 / 75 - 500. | Te |
| Rated Output | 2.0 ±0.002% | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Full Scale |
|
Temp. Range: Operating Temp. Range: Compensated |
-10 to +70 -10 to +40 |
°C |
|
Temp. Effect: On Output Temp. Effect: On zero |
0.024 0.028 |
±% of Full Scale ±% of Full Scale |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 18 |
Volts AC or DC |
| Input Impedance | 800 nominal / 430 nominal | ohm |
| Output Impedance | 705 nominal / 352 nominal | ohm |
| Insulation Resistance | >5 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP67 | |
| Cable | 5m 4 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 0.5—100T
- Sealed to IP67.
- Tension & Compression use.
- Accuracy 0.05% RO.
Applications
- Test Machines.
- Process Control.
- Small Tanks & Silos
