3410—Shear Beam Load Cell
Model: SB-3410
The SB-3410 is a low profile shear beam load cell manufactured from nickel plated alloy steel.
It has high immunity to shock or side loaded.
The 3410 can be mounted within the cellmate mounting kit to provide an ideal solution for tank and silo weighing.
Typical Specification
| Parameter | Value | Units |
|---|---|---|
| Capacities Range | 0… 250, 500, 1000, 2000 | kg |
| Rated Output | 2.0(±0.1% RO) | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.03 | ±% of Applied Load |
| Zero Balance | 2.0 | ±% of Rated Output |
|
Temp. Range: Operating Temp. Range: Compensated |
-20 to +70 -10 to +40 |
°C |
|
Temp. Effect: On Output Temp. Effect: On zero |
0.003 0.01 |
±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 380 ±10 | ohm |
| Output Impedance | 350 ±3 | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | N/A | mm |
| Weight (approximate) | N/A | kg |
| Construction | Nickel Plated Alloy Steel | |
| Environmental Protection | IP67 | |
| Cable | 3m 6 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 250—2000Kg
- Sealed to IP67
- Nickel Plated Alloy Steel
- Accuracy 0.05% RO
Applications
- Industrial platforms
- Tanks and silos
- Process Controls
- Pallet Truck Weighing
