SLP-Shackle Load Pin-Custom
Model: T-SLP-C
The T-SLP provides a simple device for tension measurement.
The unit is designed around the Crosby G2130 'Bow' body shackle.
The anti-rotation plate, nut and centralising bobbin are included within the package.
If the bow shackle sizes are not listed to your requirements PCM can custom build to suit your shackle design.
As with all PCM's load cells and pins they can be set up with a range of standard or specail instrumentation packages, including radio telemetry.
The load pin with or without instruments can be supplied with full calibration using a BS EN ISO 7500-1 test machine traceable to national standards
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 0.5, 2, 5, 10, 15, 25, 35, 50, 100 | Te |
| Rated Output | 1 - 2 Nominal | mV/V |
| Linearity & non repeatability | 0.25 - 2 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.2 | ±% of Applied Load |
| Zero Balance | 1.5 | ±% of Rated Output |
| Temp. Range: Operating Temp. Range: Compensated |
-10 to +80 Amb to +70 |
°C |
| Temp. Effect: On output Temp. Effect: On zero |
0.1 0.02 |
±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 200 | % of Rated Capacity |
| Ultimate Overload | 500 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 380 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP67 | |
| Cable | 5m 7/0.2 4 core screened |
Features
- Capacities 5-100Te
- Sealed to IP67
- Stainless Steel
- Single or dual bridges
Applications
- In line Weighing
- Heavy Industry
- Towing/Mooring tension
- Cable tension monitoring
