Load Pin — Custom Design
Model: T-LP
The T-LP provides a simple measuring device for tension measurement.
All units are designed around the customer requirements. PCM request the attached questionnaire to be completed and sent to our design team.
Once received PCM will confirm if the criteria is mechanically achievable and safe.
A quotation will be supplied stating a competitive lead time.
On receipt of a purchase order, an outline drawing and specification will be supplied for the customer for authorisation.
Once received, PCM will commence manufacture.
This process is done for all load pins.
The units are supplied with calibration certificates using a BS EN ISO 7500-1 test machine traceable to National Standards.
We recommend an in-situ calibration to obtain maximum performance.
Typical Specification
| Parameter | Value | Units |
|---|---|---|
| Capacities Range | 0.. 0.5, 2, 5, 10, 15, 25, 35, 50, 100, + higher capacities on request | Te |
| Rated Output | 0.5-1.5 nominal | mV/V |
| Linearity & non repeatability | 0.25 - 2 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.2 | ±% of Applied Load |
| Zero Balance | 1.5 | ±% of Rated Output |
|
Temp. Range: Operating Temp. Range: Compensated |
-10 to +80 Amb to +70 |
°C |
|
Temp. Effect: On output Temp. Effect: On zero |
0.1 0.02 |
±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 200 | % of Rated Capacity |
| Ultimate Overload | 500 | % of Rated Capacity |
|
Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 380 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | 17-4 ph Stainless Steel or Tool Steel | |
| Environmental Protection | IP67 | |
| Cable | 5m 7/0.2 4 core screened |
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 0.5—300Te
- Waterproof and sealed to IP67
- Stainless Steel.
- Single or dual bridges
Applications
- In Crane line Weighing
- Heavy Industry
- Offshore
- Aerospace
