1320-Single Point Load Cell
Model: SP-1320
The SP-1320 is a high capacity single point load cell that is ideal for direct mounting in high capacity platforms up to 1200mm x 1200mm.
A special stage humidity resistant protective coating assures long term reliability.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0… 1000, 1500, 2000 | kg |
| Rated Output | 2.0 ±0.2 | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.03 | ±% of Applied Load |
| Zero Balance | 0.2 | ±mV/V |
| Temp. Range: Operating Temp. Range: Compensated |
-20 to +70 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.003 0.01 |
±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 415 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | N/A | mm |
| Weight (approximate) | N/A | kg |
| Construction | Anodized Aluminium | |
| Environmental Protection | IP66 | |
| Cable | 5m 6 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 1000-2000Kg
- Sealed to IP66
- Accuracy 0.05% RO
Applications
- Very large platform scales
- Hanging scales
- Check weighing scales
