Single Point Load Cells
Single point load cells attach to an oblong shaped element. The load cell is supported at one end and the force is applied at the opposite end. Mounting details differ from model to model.
The design is commonly used is platform applications. The design is great because force can be accurately measured with a quoted area.
For example: the 1022 load cell will measure to an accuracy of 0.02% with a 350mm square foot print, (the load cell is mounted central to this square).
To be aware of:
- The fixtures and fittings must remain rigid / strong enough for the measurement.
If they are not, the forces will be lost in the fittings and not transmitted through the load cell. The accuracy will be lost.
If you would prefer to discuss your application with an engineer whilst studying the website, please do not hesitate to contact us on +44 (0) 1926 864444.
Single Point Load Cells
-
1004-Single Point Load Cell View PDF
Capacities 0.3-3Kg. Sealed to IP66.
Linearity & repeatability ±0.02% FS.
Aluminium. -
1022-Single Point Load Cell View PDF
Capacities 3-200kg. Sealed to Ip66
-
1040-Single Point Load Cell View PDF
Capacities 5-100Kg. Sealed to IP65.
Linearity & repeatability ±0.05% FS.
(Anodized Plate)Aluminium -
1250-Single Point Load Cell View PDF
Capacities 50-1500Kg. Sealed to IP65.
Linearity & repeatability ±0.02% FS.
(Anodized Plate)Aluminium. -
1320-Single Point Load Cell View PDF
Capacities 1000-2000Kg. Sealed to IP66.
Linearity & repeatability ±0.05% FS.
Anodized Aluminium.