3510-Shear Beam Load Cell

Products & Services

3510-Shear Beam Load Cell

Model: SB-3510

The SB-3510 is a low profile shear beam load cell manufactured from fully welded stainless steel construction.

It has high immunity to shock or side loading. The guide slots incorporated into the upper and lower mounting faces enable user to easily position the load cell.

The 3510 can be mounted within the cellmate mounting kit to provide an ideal solution for tank and silo weighing.

Typical Specification

PARAMETER	VALUE	UNITS
Capacities Range	0… 300, 500, 750, 1000, 1200, 2000, 3000, 5000	kg
Rated Output	2.0(±0.1% RO)	mV/V
Linearity & non repeatability	0.05	±% of Rated Output
Zero Return after 30 minutes	0.03	±% of Applied Load
Zero Balance	2.0	±% of Rated Output
Temp. Range: Operating Temp. Range: Compensated	-20 to +70 -10 to +40	°C
Temp. Effect: On Output Temp. Effect: On zero	0.003 0.01	±% of Rated Output/°C ±% of Rated Load/°C
Safe Overload	150	% of Rated Capacity
Ultimate Overload	300	% of Rated Capacity
Excitation: Recommended Excitation: Maximum	10 15	Volts AC or DC
Input Impedance	380 ±10	ohm
Output Impedance	350 ±3	ohm
Insulation Resistance	>2	GΩ at 50VDC
Deflection at Rated Capacity	N/A	mm
Weight (approximate)	N/A	kg
Construction	Stainless Steel
Environmental Protection	IP68
Cable	5m 6 core scr

Outline Dimensions in millimeters

Dimensions

NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.

Wiring Detail

Loading Mode

Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.

PCM - The Load Cell and Strain Gauging Specialists

PCM

Products & Services