GR5A-Tension Link Load Cell + Display
Model: T-TLD-GR5A
The T-TLD-GR5A provides a simple device for tension measurement for cranes and other lifting applications.
The design incorporates an autonomous instrument and a strain gauged load cell with two spherical joints incorporated in the design for load self alignment.
The indicator is equipped with a 25mm high 5 digit LCD display.
With 4 easy to find internal batteries, the GR5A reaches 1 year autonomy.
The indicator will auto power off after 30 minutes if no changes in measurement are detected.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 0.5, 1, 3, 6.5, 9.5 | Te |
| Rated Output | NA | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | Remote Zero | ±% of Rated Output |
| Temp. Range: Operating Temp. Range: Compensated |
-10 to +50 -10 to +50 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
NA | ±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 125 | % of Rated Capacity |
| Ultimate Overload | 150 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
4 off 1.5V AA Batteries NA |
Volts DC |
| Input Impedance | NA | ohm |
| Outut Impedance | NA | |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel Load Cell Aluminium Indicator Case |
|
| Environmental Protection | IP20 | |
| Cable | NA |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
margin-right: auto; margin-bottom: 0px; margin-left: auto;" />
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 0.5-9.5Te
- Sealed to IP20
- Tension use
- Accuracy 0.05% FS
Applications
- Lifting devices
- Bridge cranes
- Process Control
