DCVTC4-Bi-Directional Pancake Load Cell

Products & Services

DCVTC4-Bi-Directional Pancake Load Cell

Model: BD-DCVTC4

PCM DCVTC4-Bi-Directional Pancake Load Cell

The BD-DCVTC4 provides a simple low profile device for tension and compression measurement with a built in display.

The DCVTC4 is produced from stainless steel and is a fully welded assembly.

The indicator has a 7 segment display with a character height of 13mm.

The DCVTC4 load cell has been designed for test rig applications where static and dynamic measurement is required.

Typical Specification

PARAMETER	VALUE	UNITS
Capacities Range	0.. 0.5, 1, 2.5, 5, 10, 20, 30, 50, 75, 100	Te
Rated Output	2.0 ±0.002	mV/V
Linearity & non repeatability	0.05	±% of Rated Output
Zero Return after 30 minutes	0.05	±% of Applied Load
Zero Balance	±10% Adjustment
Temp. Range: Operating Temp. Range: Compensated	-10 to +70 -10 to +40	°C
Temp. Effect: On Output Temp. Effect: On zero	0.024 0.028	±% of Full Scale ±% of Full Scale
Safe Overload	150	% of Rated Capacity
Ultimate Overload	300	% of Rated Capacity
Excitation: Recommended Excitation: Maximum	12 15	Volts AC or DC
Maximum Electrical Input	25	mA
Connector	MIL PT02E10-6P
Insulation Resistance	>2	GΩ at 50VDC
Deflection at Rated Capacity	˜0.06 - 0.23	mm
Weight (approximate)	˜1.6 - 16.5	kg
Construction	Stainless Steel
Environmental Protection	IP40
Cable	5m 2 core scr

Outline Dimensions in millimeters

Dimensions

NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.

Wiring Detail

Loading Mode

Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.

PCM - The Load Cell and Strain Gauging Specialists

PCM

Products & Services