CM-Compression Load Cell
Model: C-CM
The C-CM provides a single measuring device for compression measurement.
The CM is produced from stainless steel construction and has an IP rating of IP67.
The load cell has been designed for test rig applications.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 100, 250, 500, 1000, 2500, 5000 | Kg |
| Rated Output | 2.0 nom | mV/Vd> |
| Linearity & non repeatability | 0.25 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Full Scale |
| Temp. Range: Operating Temp. Range: Compensated |
-20 to +70 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.025 0.03 |
±% of Full Scale ±% of Full Scale |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 400 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | 0.3 | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP67 | |
| Cable | 3m 4 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 100 - 2500Kg
- Sealed to IP67
- Compression use
- Linearity & repeatability ∓0.25% FS
Applications
- Test Machines
- Process Control
- Miniature weighing projects
- Harsh environments
