CLS-Compression Load Cell
Model: C-CLS
The C-CLS is a heavy duty column design load cell produced from stainless steel.
The design includes an self aligning load button to miximise it's performance.
If the capacities or dimensions do not suit your requirements, PCM's in-house design and build service may be able to satisfy your requirements.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 30, 60, 100, 200, 300, 500 | Te |
| Rated Output | 2.0 Nominal | mV/V |
| Linearity & non repeatability | 0.045 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.036 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Rated Output |
| Temp. Range: Operating Temp. Range: Compensated |
-20 to +70 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.03 0.03 |
±% of Applied Load/°C ±% of Rated Output/°C |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 18 |
Volts AC or DC |
| Input Impedance | 700 ± 2 | ohm |
| Output Impedance | 700 ± 2 | ohm |
| Insulation Resistance | >5 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless steel | |
| Environmental Protection | IP68 | |
| Cable | 5m 4 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 30-500Te
- Sealed to IP68
- Accuracy 0.045% RO
- Custom build dimensions available
Applications
- Heavy Duty Weighing
- Rolling Mills
- Industrial Platforms
- Test Rigs
