Force Washer-Compression Load Cell
Model: C-FW
The C-FW is a compact bobbin style design load cell produced from aluminium & stainless steel. PCM can supply an optional hardened washer for bolt torque monitoring projects. If the capacities or dimensions do not suit your requirements, PCM's in-house design and build service may be able to satisfy your requirements.
The units are supplied with calibration certificates using a BS EN ISO 7500-1 test machine traceable to National Standards.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 500, 1000, 2000, 5000, 10000, 25000 | Kg |
| Rated Output | 2.0 nom | mV/V |
| Linearity & non repeatability | 1.0 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Full Scale |
| Temp. Range: Operating Temp. Range: Compensated |
-30 to +80 -10 to +70 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.1 0.02 |
±% of Applied Load/°C ±% of Rated Output/°C |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 700 nominal | ohm |
| Output Impedance | 700 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | <1Te Aluminium. >1Te Stainless Steel |
. |
| Environmental Protection | IP54 | . |
| Cable | 5m 4 core scr | 7/0.1-PVC Sheath |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 500-2500Kg
- Sealed to IP54
- Accuracy 1%RO
- Custom Build dimensions available
Applications
- Heavy Duty Weighing
- Rolling Mills
- Monitoring bolt up forces
- Test Rigs
