220 Bending Ring Load Cell
Model: C-220
The C-220 is a low profile bending ring load cell produced from stainless steel and is a welded construction. The low profile design and low cost makes this load cell ideal for modern low profile designs for many applications.
There is a special mounting kit available to maximise the load cell's performance.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 5, 10, 20, 30, 50 | Te |
| Rated Output | 2.0 ±% 0.1 | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Rated Output |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Rated Output |
| Temp. Range: Operating Temp. Range: Compensated |
-30 to +70 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.002 0.0028 |
±% of Applied Load/°C ±% of Rated Output/°C |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 1065 nominal | ohm |
| Output Impedance | 1025 nominal | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP68 | |
| Cable | 5m(5T), 10M(10&20), 20m(30&50T) 6 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 5 - 50Te
- Sealed to IP68
- Accuracy 0.05% RO
Applications
- Truck Scales
- Hoppers for process control
- Tank and silo weighing
- Harsh environment
