TCA- Bi-Directional Load Cell
Model: BD-TCA
The TCA is a low profile S-Type design load cell produced from aluminium material. Used for both tension and compression applications.
The TCA is a standard design loal cell.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 1, 2, 5, 10, 25, 50 | Kg |
| Rated Output | 2.0 nominal | mV/V |
| Linearity & non repeatability | 0.06 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.025 | ±% of Applied Load |
| Zero Balance | 1.0 | ±% of Full Scale |
| Temp. Range: Operating Temp. Range: Compensated |
-20 to +70 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.0021 0.0025 |
±% of Full Scale ±% of Full Scale |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 18 |
Volts AC or DC |
| Input Impedance | 440 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >5 | GΩ at 50VDC |
| Deflection at Rated Capacity | 0.3 | mm |
| Weight (approximate) | 0.3 | kg |
| Construction | Aluminium | |
| Environmental Protection | IP20 | |
| Cable | 3m PVC core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 0..1kg-50Kg
- Sealed to IP20
- Tension & Compression use
- Single wheatstone bridge
Applications
- Test Machines
- Restricted height restraint
- Virtuall all industries
