620 Bi-Directional S Type Load Cell
Model: BD-ST-620
The BD-ST-620 provides a simple measuring device for tension and compression measurement.
The design has a welded seal to enable it to be used for a wide range of applications of process weighing and force measurement.
The 620 offers a choice of metric or unified bolt thread systems.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 500, 1000, 2000, 5000 | Kg |
| Rated Output | 2.0±0.1% | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Applied Load |
| Zero Balance | 2.0 | ±% of Full Scale |
| Temp. Range: Operating Temp. Range: Compensated |
-30 to +90 -10 to +40 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
0.04 0.007 |
±% of Full Scale ±% of Full Scale |
| Safe Overload | 150 | % of Rated Capacity |
| Ultimate Overload | 300 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
10 15 |
Volts AC or DC |
| Input Impedance | 400 nominal | ohm |
| Output Impedance | 350 nominal | ohm |
| Insulation Resistance | >5 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel | |
| Environmental Protection | IP68 | |
| Cable | 5m 6 core scr |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 500-5000Kg
- Sealed to IP68
- Tension & Compression use
- Accuracy 0.05% RO
Applications
- Test Machines
- Process Control
- Small tanks & silos
- Hanging scales
