DNA-Bi-Directional Load Cell + Display
Model: BD-LCD-DNA
The BD-LCD-DNA provides a simple device for tension measurement for cranes and other lifting applications.
The design incorporates an autonomous instrument and a strain gauged load cell.
The display incorporates a bar indication that shows the percentage of measured load with respect to the load cells' full scale.
The indicator is equipped with a 16mm high 5 digit LCD display.
With 4 easy to find internal batteries, the DNA reaches 1 year autonomy.
The indicator will auto power off after 30 minutes if no changes in measurement are detected.
Typical Specification
| PARAMETER | VALUE | UNITS |
|---|---|---|
| Capacities Range | 0.. 0.1, 0.2, 0.5, 1, 2.5, *5. | Te |
| Rated Output | NA | mV/V |
| Linearity & non repeatability | 0.05 | ±% of Full Scale |
| Zero Return after 30 minutes | 0.05 | ±% of Full Scale |
| Zero Balance | Adjustable | ±% of Rated Output |
| Temp. Range: Operating Temp. Range: Compensated |
-10 to +50 -10 to +50 |
°C |
| Temp. Effect: On Output Temp. Effect: On zero |
NA | ±% of Rated Output/°C ±% of Rated Load/°C |
| Safe Overload | 120 | % of Rated Capacity |
| Ultimate Overload | 150 | % of Rated Capacity |
| Excitation: Recommended Excitation: Maximum |
4 off 1.5V AA Batteries NA |
Volts DC |
| Input Impedance | NA | ohm |
| Output Impedance | NA | ohm |
| Insulation Resistance | >2 | GΩ at 50VDC |
| Deflection at Rated Capacity | NA | mm |
| Weight (approximate) | NA | kg |
| Construction | Stainless Steel Load Cell Aluminium Indicator Case | |
| Environmental Protection | IP40 | |
| Cable | NA |
Outline Dimensions in millimeters
NOTE: If the dimensions or specification do not suit, PCM have an in-house design and build service that should satisfy your requirements.
Wiring Detail
Loading Mode
Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.
Features
- Capacities 0.1-5Te
- Tension & Compression use
- Accuracy 0.05% RO
- Selectable Units: kg, Te, N, daN, kN
- Positive + Negative peak function
Applications
- Lifting devices
- Industrial devices
- Process Control