Load Cell Indicators - Panel Mount
The instrumentation will power the load cell. The mV/V signal coming back from the load cell is converted by the indicator and displays the force in a unit (e.g.: Kg, kN, Lb -customers choice). The indicator will need to be mounted in to a case or control rack for safe use.
The load cell and instrumentation will require calibrating together for the system to work correctly. This is done by applying a known force to the load cell and the instrument's gain to be set.
If you would prefer to discuss your application with an engineer whilst studying the website, please do not hesitate to contact us on +44 (0) 1926 864444.
Load Cell Indicators - Panel Mount
-
Type INT Series- Intuitive Panel Meters View PDF
10 point linearization facility.
8 memory calibration feature for multiple load cell data.
Analogue outputs, 4-20mA, 0-10V. -
ADW15 Weighing Indicator/Controller View PDF
4.5 digit high resolution.
Auto calibration.
10V @ 150mA excitation to drive up to 4/350 ohm Strain Gauges. -
ADP15 Versatile Indicator/Controller View PDF
Input Types for all Industry Standard Sensors.
Full calibration & programming via keypad or comms import.
Analogue outputs to all industry standards.