Indicators - Cased
The instrumentation will power the load cell. The mV/V signal coming back from the load cell is converted by the indicator and displays the force in a unit (e.g.: Kg, kN, Lb -customers choice). The indicators within this range are encased so that the operator can either use it on the move (if battery powered) or be a permanent fixture, e.g.: wall mounted.
The load cell and instrumentation will require calibrating together for the system to work correctly. This is done by applying a known force to the load cell and the instrument's gain to be set.
If you would prefer to discuss your application with an engineer whilst studying the website, please do not hesitate to contact us on +44 (0) 1926 864444.
Indicators - Cased
-
PSD - Strain Gauge or Load Cell Hand Held Display
- View PDF
Tactile keyboard, with dual range selection, peak/valley hold, gross/net and on/off controls.
Dual range facility
7 digit LCD display, with battery, peak, trough, net, error and shunt cal indication.
-
Apex Junior Weighing Indicator/Controller
- View PDF
Stainless Steel Enclosure.
Mains or battery/re-charger.
IP65 Enclosure.
-
Excelsior Weighing Indicator/Controller
- View PDF
Stainless Steel Enclosure.
6 Digit LCD Display with 25.4mm high characters.
IP65 Enclosure.
-
SMW-HR - Wall Mount High Resolution Weighing Indicator/Controller
- View PDF
4 point linearisation.
4-20mA and 0-10V outputs.
Simple one pass Auto Calibration.